Mod Archive Forums
Music Production => MilkyTracker Bug Reports => MilkyTracker => Tracking => Bug Report Archive => Topic started by: indigo on September 09, 2008, 06:03:02
-
After loading a saved .XM file, and creating a new instrument, the Fadeout setting in the instrument editor is not set to cut, even though it says that it is. Moving the slidebar sets it to cut again. It should be set to cut by default whether I load a saved file or start a new one.
Thanks. :)
Edit: You have to turn the volume envelope on to see this happening.
-
This did not work for me. Can you send the XM you've been trying this with? Thanks.
-
Ok, I can confirm this.
Load any module (just tried with an XM and a MOD of mine). Create a new sample, generate a wave and loop it. Then enable volume envelope and the fadeout value sounds more like 000 than CUT. If you do this without loading a module first and just start from the scratch, it's OK.
-
You know what's funny? If you "zap" the song, after adding a new instrument, the fade out value drops from cut to 0.
-
Ok, indigo, check the bug list (http://modarchive.org/forums/index.php?topic=1259.0) now. And thanks. :)