Mod Archive Forums
Music Production => MilkyTracker => Tracking => MilkyTracker Tracks & Songs => Topic started by: Kmuland on September 22, 2007, 03:03:13
-
yesterday Coda explained me how Surround sound works into IT. Just right channel have inverted phase.
Surround can be used on milky too.
Load two equal samples. Enter notes in Double channels.. and set samples panned to 00 and FF .. and volume at 50% both.
One of the channels have to be phase inverted.. so go to milky sample editor and apply boost volume filter to -100% for invert ;)
-------------------
Ok... this trick consume an extra channel and increase size cause you are using 2 samples of same instrument.. anyway not all channels need to be surronded.. only 1 or 2 per song could be enough for make the track sound "spaced"
btw the older trick for get surround is also available when command and volume effect column are empty:
double channel, pan hard to left right and add E11 command to the notes of a channel
-
oh yeah, i remember when this trick was firstly discovered by Skaven who used in Second Reality ;D
-
Stereo width is fun to play around with. I've used these techniques a lot (they all require 2 channels):
This one uses sample offsets - if the wave is small you can do out-of-phase stuff using this too
C-4 P0 901 | C-4 PF 000
If you don't want to clip a sample, delay it instead
C-4 P0 ED1 | C-4 PF 000
This one gives sort of a slight flange effect
C-4 P0 E11 | C-4 PF E21(optional)
This is great for percussion that isn't a bassdrum but you may need to reduce the sample's volume
C-4 -- 800 | C#4 -- 8FF
If you need to save some effect space and know for a fact that the sample will always have some sort of stereo width, just set the sample's pan to the left or right, then use effects to do only one side. For example, if you set the pan all the way to the left (00) then all you need is this:
C-4 -- --- | C#4 -- 8FF
While using invert-channel you can achieve surround-like effects, but if your listener is using mono output for some reason, it's going to sound really weird and might not even sound like anything at all.
-
While using invert-channel you can achieve surround-like effects, but if your listener is using mono output for some reason, it's going to sound really weird and might not even sound like anything at all.
to be exact (assuming the mixing is precise), they won't hear anything - coz x -x = 0 :)
Anway, playing with small delays, offsets and freq slides is indeed fun - You can do it in so many ways, also something like this may sound pretty interesting:
C-4 P0 101 C-4 PF 000
C-4 P0 201 C-4 PF 000