This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

21

Tracking / Re: About The FANTASTIC SVArTracker 1.22 >>>>>

« on: December 14, 2020, 19:26:43 »

OK, was messing with this last night trying to figger out pattern effect commands...

This is a UNIQUE system...

You have regular VST-Sampler automation under the arranger view BUTT! You also got effect column automation that you set-up in the effects processor using curves & commands then store it into a 'cell' which has a 3 digit-letter code...

Using this code in the effects column in your pattern invokes whatever garbage you have setup...Practice is needed of course...

The nice thing about this method is that you have total control over what to modify and using curves makes it all the more organic...This is THEN packed away into a 'cell' to get out of the way & be recalled by a few digits-letters on ANY track-note so they are re-useable as well...

The matrix of stored cells is very large and there is also a cell matrix for your regular arranger based automation as well...

22

Tracking / Re: VST Sources for Trackers that use them>>>>

« on: December 06, 2020, 00:04:45 »

Yeah...Thanks for that lead, might be some worth digging out...

I am putting up links here that work TODAY with no going to compiling sites or KVR which is downhill in motion...

And with a slant to work on old VST sequencers which are picky...I am using H8 Tracker to test and if I say it passed in THAT, then they should run in ANYTHING...Reason 1.0, FreeBase, BUZE (finicky scanning), EvoBeats Sequential Vibes (Finicky scanner) or any OLD piano-roller like Ultrano Dreamer, LUNA, DeltaSP-Macaw or OLD Abletons or Logics...

Just to name a few...

Here are some from DSP.Mutagen...Have tested the MutantKoto in H8 Tracker works fine should work in any other...Other plugs too test soon-

https://web.archive.org/web/20050305050838/http://dsp.trilete.net/?pid=projects


Code-Audio Fat-Ass Plugs, synthedit not work in H8 maybe for you-

https://web.archive.org/web/20050822031731/http://fat-ass.tk/


HGsounds Freebies but all installer so no test yet-

https://hgsounds.com/product-category/free-vst-plugins/


A few rare from old TAL-audio all work in H8-

https://web.archive.org/web/20110106033220/http://kunz.corrupt.ch/downloads/RealSynth.dll

https://web.archive.org/web/20110106035934/http://kunz.corrupt.ch/downloads/TAL-U-No-60.zip

https://web.archive.org/web/20110106031221/http://kunz.corrupt.ch/downloads/mfilter.dll


Shuriken.se Plugs free-

http://www.shuriken.se/


MykraSound plugs look good but not in H8-

https://web.archive.org/web/20070420184948/http://www.mykrasound.com/vstplugins.htm

Contralogic plugs free not working in H8-

https://www.contralogic.com/vst-plugins/


Antress Plugins 2007 all links coming back-

https://web.archive.org/web/20070325220434if_/http://www.modernplugins.in-tw.com:80/

23

Tracking / Re: VST Sources for Trackers that use them>>>>

« on: December 05, 2020, 19:36:44 »

OK getting too many TABs open so-

OceanTurtle has a nice Equalizer that works great in H8 Tracker...There is also a pluck synth that they have but crashes H8...Probably work in plenty else-

https://web.archive.org/web/20150619075846/http://www.oceanturtlemusic.com/


Roberson has Synths, haven't tested yet DL good though-

https://web.archive.org/web/20180902235330/http://www.robersonaudio.com/vintage-synth-collection.html


Theodor Krueger has some nice ones-

https://web.archive.org/web/20120307210555/http://www.theodorkrueger.com/home.htm


You can get the Anarchy Rhythms stuff 32-64bit & MAC-

https://web.archive.org/web/20170708203340/http://www.anarchy-rhythms.com/


Here a directory of plugins of dev Subminimal-

https://web.archive.org/web/20130306093233/www.gersic.com/plugins/hosted/subminimal/


Here is a Buzz directory of Xlutop-

https://xlutop.com/buzz/zip/

An absolute massive collection of SirSickSik's VSTs...this will take awhile-

https://www.dropbox.com/sh/g8khq716tnngj7x/AABlSoPQ_Nd_WFWoTyzVwK40a

24

Tracking / Re: Any Way to get Buzz Machines to work in regular VST Enviro?...

« on: December 05, 2020, 17:27:14 »

OK, Well after having tried this gimmick setup I guess I'll have to pass for now...

-No good or work in H8 Tracker or SVArTracker...

Maybe try playing with it in other sequencers later on...OR NOT!

Was turned on by prospect of GUI-less instruments in H8...

So looks like you were right all along Saga Musix...Thanks for the sound (or lack of it out of generators) advice...

25

Tracking / Re: VST Sources for Trackers that use them>>>>

« on: December 05, 2020, 16:47:05 »

I'm sure everyone knows Tunefish...Version 3 & 4 work great in H8 Tracker but version 4 high CPU...Version 3 much better...

https://www.tunefish-synth.com/index.php/download


Maxsynths started giving away free their VSTs a few years ago...Site is gone now but they uploaded most to internet archive...Big GUIs & none work in H8 Tracker-

https://archive.org/download/MaxsynthsPluginArchive

MV has a few nice ones-

https://vicanek.de/audioprocessing/midichoir.htm

https://vicanek.de/audioprocessing/lavozcantante.htm

Some of the SAM stuff, numerous pages, look about-

https://web.archive.org/web/20120324025906/http://homepage.ntlworld.com/jez.price/synths.htm

Smattering of RX2s & stuff just came across-

https://web.archive.org/web/20040819063207/http://www.reasonrefills.com/rx2/

26

Tracking / Last Buzz Version with NO NET Frame Req?!!!

« on: December 05, 2020, 14:21:41 »

Some seemingly easy info can be hard to find sometimes...

Anybody know the last version of Jeskola Buzz that had NO NET Frame requirements?

I look here and it appears that it might be 1189 as after that the filesize drops near 3MB in future builds (for awhile)...

Thanks....

27

Tracking / VST Sources for Trackers that use them>>>>

« on: December 05, 2020, 14:01:40 »

Have been auditioning VSTs for the H8 Tracker so have amassed all kinda source links that you won't find on VSTUpYou or VST4Fee or those other 'compiling' sites that are starting to get irritating with all the ads, demo links or link leads to commercial product or is just DEAD!

I have nothing to gain so you get the real deal...

I mostly look for 'OLDIES' Win32...I have a 64bit machine but only use it for graphic stuff & all my others are 32bit for audio as there is so much 32bit that will never see 64bit and many 32bit plugs are becoming free now as well....



First site here many old plugs, original free Muon Tau & Original Free Phatmatik (uses REX not RX2) and 2 favs by Stefan Jeworowski...Others too

https://www.espace-cubase.org/anglais/page.php?page=freevsti


The Breath Cube & Cube Breath & video comes back too-

https://web.archive.org/web/20090216143614/http://atomictraveller.com/


Xfer Records Free you know those are ALL good-

https://web.archive.org/web/20140114231448/https://xferrecords.com/freeware/

Mvxsynths prolific Synthedit-

https://sites.google.com/site/mvxsynths/

LePou Cabinets...Amazingly ALL these work perfect in H8 Tracker so should work in ANYTHING-

http://www.grebz.com/simulator_freeamp_poulin_eng.php

OdoSynths is now a dead torrent but you can get them all on the wayback-

https://web.archive.org/web/20081014070141/http://www.odosynths.com/vst.htm

Kx77free-

http://kx77free.free.fr/English-contents.html#plugins_kx77free

Marvin Synths-

https://web.archive.org/web/20180502094530/http://marvinpavilion.ojaru.jp/en/sound/vst.html

More to come....

28

Tracking / Re: Any Way to get Buzz Machines to work in regular VST Enviro?...

« on: December 04, 2020, 23:59:38 »

Hey thanks for the quick reply...


Evidently there was one by Buzz dev in 2002-2004 which I found on the wayback...Then there was one BUZE Dev made which is still online but has to have alot done to work...

Best seems here-

https://app.box.com/s/61j4ackkkuelxmss1dadhdbg2hbrkayn

Guy has it packaged up real nice including machines tested to work & plenty of instruction....

29

Tracking / Any Way to get Buzz Machines to work in regular VST Enviro?...

« on: December 04, 2020, 22:49:53 »

I know Buzz machines are similar to VST but not actually VSTs...

There anyway to get them working as such?...

I found an old FL Studio adapter but don't seem to work that way....

30

Tracking / Re: H8 Tracker 1.90 Tips-Techniques-Pitfalls...

« on: December 02, 2020, 19:41:18 »

Well, Just tested DiscoDSP HighLife and it functions perfect in H8...

Rather a milestone as sampler as it can sample a VST & freeze it converting the output to its own sample library, which can also be exported to SFZ...

So in H8 or any other sequencer you have a problem using then just freeze the plug in HighLife then you got same sound with less HP needed...

I already had this & search didn't help too much but might find it here-

https://www.vst4you.com/pages/vst%20instruments/highlife.html

Hopefully that's the freeware one...There was 1.4 then the R1-R3s were free not compatible with 1.4............ confusing times...